Cofra Montserrat GORE-TEX Safety Boots
Model: Montserrat Cofra
Description of the Cofra Montserrare Waterproof Safety Boots
Brown water repellent Pull-Up nubuck boot, GORE-TEX HPR membrane lining,antistatic, anti-shock, slipping resistant, non metallic APT Plate midsole.
Upper made fromWater repellent Pull-Up nubuck
Lining made from GORE-TEX® XCR®
Footbed made from Full SOFT-BED, made of extremely soft PU, anatomic, removable, antistatic, covered with cloth
Outer Sole made from WORK TREK PU/Nitrile resistant to + 300°C (1 minute contact)
Plus points non metallic APT Plate, non metallic TOP RETURN toe cap
100% Metal Free
Width 11 Mondopoint
Safety Rating S3 WR HRO SRC
SIZES UK 10
These Cofra Boots have a Gore-Tex, Membrane it is made of 1.4 billion pours per cm2 granting waterproofness and high breathability Gore-Tex, Membrane protects against bacteria and resists high temperatures.
These Cofra boots have a Top return Composite Toe Cap resistant to 200j, they are non magnetic, and are great in security areas where metal detectors are used, they also have a reduced thickness and thermal insulting properties when compared to steel, their main purpose is to resist against impact 200j from +60deg C - to -40deg C, and are Lighter being only 50gr compared to 90gr for steel toe caps.
The APT Plate is lighter than steel being only 50 gr compared to 65gr for steel, the APT midsole also offers a better thermal insulation compared to steel midsoled boots, the APT midsole offers a better surface area protected than a steel midsole would.
This Cofra boot has a Soft-Bed footbed insole which is soft and comfortable polyurethane; the patters of the lower layer guarentees shock absorbing action and good grip, the upper absorbs perspiration and leaves the foot always dry.
Slip Resistance In Detail
SRA : ceramic + detergent solution – flat 0,56 0,32
SRA : ceramic + detergent solution – heel (contact angle 7°) 0,51 0,28
SRB : steel + glycerol – flat 0,25 0,18
SRB : steel + glycerol – heel (contact angle 7°) 0,19 0,13
Suggested uses Engineering jobs, building industry, maintenance jobs.
Care and maintenance Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.
"Waterproof" the test for a product to be rated as waterproof was 500 steps in 1cm of water it has now been increased to 1000 steps in 3cm of water, no material can ever be 100% waterproof it will always have some Ingres, if you are working in very wet conditions GORE-TEX lined products will give a better level of protection as they set the standard at 250,000 steps in 5cm of water, or a wellington. Wellingtons are only waterproof to a point if you are using a pressure washer this is at a much higher pressure than rain and very few wellingtons can withstand this.
Please Note Cofra Products Take 7-10 Days To Delivery As They Are An Italian Product, we do believe that they are well worth the extra wait
It is extremely difficult to explain just how good Cofra's product is in comparison to other safety footwear