Cofra Thermic Black Metatarsal Safety Boots

Model: Thermic Cofra

PU/Nitrile Rubber boot, water resistant, antistatic, anti-shock, slipping and 100% metal free. Innovative extra-light compound. It resists very well to hydrolysis, so that the boot maintains its chemical and physical performance during time. A perfumed essence is added to the compound to prevent nasty odours. Abrasion resistant cleats 11 mm. Cold Insulation -50°C (the thermal comfort inside the boot stays optimal). Very good resistance to mineral oils and hydrocarbons. Footbed THERMIC INSOLE CI, insulating against low temperatures, the thermal comfort inside the footwear is granted thanks to the special PU compound devised resistant, non metallic APT Plate midsole.

Suggested uses: Zoo Technics, agriculture, fishing, damp environments, agriculture.

Upper. Cold Defender PU resistant to -25°C

Lining. Abrasion resistant polyester.

Footbed. COLD BARRIER, anatomic and perfumed footbed, insulating against low temperatures. The thermal comfort inside the footwear is granted thanks to the specials PU compound devised to give high insulation.

Outsole. INSOLE: Cold Defender PU resistant to -25°C. OUTER SOLE: Nitrile rubber

Plus. Innovative extra-light compound. It resists very well to hydrolysis, permitting the boot to maintain its chemical and physical performance during time., A perfumed essence is added to the compound to prevent nasty odours. ABRASION RESISTANT CLEATS 11 mm. COLD INSULATION (-50°C). non metallic APT Plate, non metallic TOP RETURN toe cap.

Width. 12 Mondopoint

Safety Rating S4 / S5

Sizes 6-13 39-48

 

 

APT Plate Lighter than steel: only 50 gr compared to 65gr for steel, APT Also higher thermal insulation compared to steel, APT Planter surface protected 100%

 

Top return Composite Toe Cap resistant to 200j, non magnetic, great in security areas where metal detectors are used reduced thickness, thermal insulting, it resists against impact 200j from +60deg C - to -40deg C, Lighter only 50gr compared to 90gr for steel toe cap.

 

Cold Barrier Anotomic and perfumed footbedd, insulating against low temperatures. The thermal comfort inside footwear os granted thanks to the special PU compound devised to give high insulation.

 

Cold Deffender PU is a special PU compound which guarantees higher performances than the ordinary PU

 

Mechanical Resistance to Low Temperatures: particularly sturdy in dynamic conditions and under strong mechanical strains, typical of different work activities, under extreme temperatures up to -25deg C

 

Thermal Insulaton: together with the footwear construction, it guarantees succesful test for cold insulation with better results than the standard -17 deg C required by EN ISO 20345:2007

 

100% Metal Free

 

 

It is extremely difficult to explain just how good Cofra's product is in comparison to other safety footwear.

Care and maintenance: Clean it after each use drying off in ventilated areas, away from heat sources; remove all the residuals of contaminating stuff or dust with a good shoe-brush or a duster. Wash the boots with water and soap. Do not use aggressive products (acids, benzine, solvents) which may alter quality, protection functions and life of the footwear.