Cofra Gullveig GORE-TEX Rigger Boots Composite Toe Caps Midsole
Model: Gullveig Cofra
Description of the Cofra GORE-TEX Rigger Boots Waterproof Safety Boots
Description: Black water repellent full grain leather resistant to low temperatures rigger boot, GORE-TEX Insulate Comfort Footwear membrane lining, antistatic, anti-shock, slipping resistant, non metallic APT Plate midsole Zero Perforation.
Upper made from Water repellent full grain leather resistant to low temperatures
Lining made from GORE-TEX® Insulated Comfort Footwear
Footbed made from COLD BARRIER anatomic and scented footbed, insulating against low temperatures. The thermal comfort inside the footwear is granted thanks to the specials PU compound devised to give high insulation
Outer Sole made from PU / Nitrile rubber resistant to low temperatures
Plus points Midsole non metallic APT Plate - zero perforation,Toe cap non metallic TOP RETURN
Plus points Extra Wide Fitting Rigger Boots
Width 12 Mondopoint - Extra Wide Fitting
Safety Rating S3 WR SRC
SIZES 6-12 39-47
This is brand new boot to the Cofra GORE-TEX range the Cofra Gullveig, it the only GORE-TEX rigger boot available that we know of, it has the new anti torsion sole, and comes with all the benefits that GORE-TEX Insulated Comfort brings to safety footwear, this product has the extra insulation to help keep your feat warmer and, dry warm feat can't be underestimated in their importance to help with a successful days work.
These Cofra Gullveig Safety Boots have a GORE-TEX, Membrane it is made of 1.4 billion pours per cm2 granting waterproofness and high breathability GORE-TEX, Membrane protects against bacteria and resists high temperatures.
The midsole is an APT Plate is lighter than steel being only 50 gr compared to 65gr for steel, the APT midsole also offers a better thermal insulation compared to steel midsoled boots, the APT midsole offers a better surface area protected than a steel midsole would.
These Cofra boots have a Top return Composite Toe Cap resistant to 200j, they are non magnetic, and are great in security areas where metal detectors are used, they also have a reduced thickness and thermal insulting properties when compared to steel, their main purpose is to resist against impact 200j from +60deg C - to -40deg C, and are Lighter being only 50gr compared to 90gr for steel toe caps.
This Cofra GORE-TEX boot has a COLD BARRIER PU is a special PU compound which guarantees higher performances than the ordinary PU for mechanical resistance to low temperatures and thermal insulation and it resist under extreme temperatures up to -25°C. The rubber outsole design has been devised to improve the slip resistance and enhance the comfort even on frozen and rambling surfaces.
This waterproof rigger boots has a COLD BARRIER anatomic and scented footbed, insulating against low temperatures. The thermal comfort inside the footwear is granted thanks to the specials PU compound devised to give high insulation, covered with warm fabric. The leather used for these footwear is subjected to a treatment which makes them flexible and resistant to low temperatures even in the flexing areas to prevent cracks and stiffening. Sole COLD DEFENDER PU/Nitrile rubber resistant to low temperatures.
Suggested uses: Footwear for cold temperature. Care and maintenance: Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.
Materials used in this Rigger Boot
Complete shoe Water resistance
Toe cap: non metallic extra large TOP RETURN toe cap, impact resistant until 200 J and compression resistant until 1500 kg
Anti perforation midsole: in multi-layers highly tensile fabric, penetration resistant, Zero Perforation.
Antistatic shoe: the bottom is fit for the dissipation of electrostatic charges
Energy absorption system: polyurethane low density and heel profile
Upper Black water repellent grain leather, resistant to low temperatures thickness 1,8/2,0 mm
Quarter GORE-TEX® membrane, breathable and abrasion resistant, colour grey
lining thickness 1.2 mm
Sole COLD DEFENDER PU - Nitrile rubber, antistatic, resistant to low temperatures, directly injected in the upper
Outsole: black Nitrile rubber, slipping resistant, abrasion resistant, hydrocarbons resistant, and hot resistant.
Midsole: Cold Defender PU resistant to -25°C, colour black
Slip Resistance Test Results
SRA : ceramic + detergent solution – flat 0,45 0,32
SRA : ceramic + detergent solution – heel (contact angle 7°) 0,40 0,28
SRB : steel + glycerol – flat 0,20 0,18
SRB : steel + glycerol – heel (contact angle 7°) 0,14 0,13
It is extremely difficult to explain just how good Cofra's product is in comparison to other safety footwear.
"Waterproof" the test for a product to be rated as waterproof was 500 steps in 1cm of water it has now been increased to 1000 steps in 3cm of water, no material can ever be 100% waterproof it will always have some Ingres, if you are working in very wet conditions GORE-TEX lined products will give a better level of protection as they set the standard at 250,000 steps in 5cm of water, or a wellington. Wellingtons are only waterproof to a point if you are using a pressure washer this is at a much higher pressure than rain and very few wellingtons can withstand this.
Please note that some Cofra products may have a 7-10 day lead time to delivery