Cofra Elaine Ladies Safety Boots Aluminium Toe Caps Composite Midsole
Model: Elaine Cofra
Description of the Cofra Elaine Ladies Work Shoes
Black water repellent leather shoe, leather lining, antistatic, anti-shock, slipping resistant, non metallic APT Plate midsole Zero Perforation. Plus: Leather insole padded in the heel area, padded in the heel area. The height of the heel area (30 mm) guarantees proper posture, reducing fatigue to the back and to the lower limbs, and also gives a female look to the safety footwear. Support made of fibreglass conveniently placed between heel and sole, which provides support and protection of the plantar arch, thus preventing harmful bendings.
Upper made fromBlack water repellent leather thickness 1.4 / 1.6 mm
Lining made from Gabardine, breathable, colour black thickness 1.2 mm, Leather, breathable, abrasion resistant, colour black
Footbed made from Full SOFT-BED, made of extremely soft PU, anatomic, removable, antistatic, covered with cloth
Outer Sole made from Antistatic dual-density Polyurethane directly injected in the upper, black, high density, slipping resistant, abrasion resistant and hydrocarbons resistant, Midsole black, low density, comfortable and anti-shock Adherence coefficient of the sole.
Plus points non metallic composite Plate, non metallic Aluminium toe cap
Width 10 Mondopoint
Safety Rating S3 SRC
SIZES 2-7 35-41
The APT Plate is lighter than steel being only 50 gr compared to 65gr for steel, the APT midsole also offers a better thermal insulation compared to steel midsoled boots, the APT midsole offers a better surface area protected than a steel midsole would.
This Cofra boot has a Soft-Bed footbed insole which is soft and comfortable polyurethane; the patters of the lower layer guarentees shock absorbing action and good grip, the upper absorbs perspiration and leaves the foot always dry.
Please Note Cofra Products Take 7-10 Days To Delivery As They Are An Italian Product, we do believe that they are well worth the extra wait
Slip Resistance In Detail
SRA : ceramic + detergent solution – flat 0,47 - 0,32
SRA : ceramic + detergent solution – heel (contact angle 7°) 0,30 - 0,28
SRB : steel + glycerol – flat 0,23 0,18
SRB : steel + glycerol – heel (contact angle 7°) 0,13 0,13
Suggested uses Canteens, store houses, industries..
Care and maintenance Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.
It is extremely difficult to explain just how good Cofra's product is in comparison to other safety footwear.