Cofra Michelangelo GORE-TEX Safety Boots
Model: Michelangelo Cofra
Description of the Cofra Michelangelo GORE-TEX Safety Boots
Brown - beige water repellent Pull-Up nubuck ankle boot, GORE-TEX membrane lining, antistatic, anti-shock, slipping resistant, non metallic APT Plate midsole Zero Perforation.
Plus: Footwear completely free from metal parts. Full SOFT-BED footbed, made of extremely soft PU, anatomic, removable, antistatic, covered with cloth. Cold and heat insulation. Bellows tongue. TPU toe cap protection.
Suggested uses: Engineering jobs, building industry, maintenance jobs.
Care and maintenance: Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.
Features of the Cofra Michelangelo GORE-TEX Boots
Upper made from Water repellent Pull-Up nubuck
Lining made from GORE-TEX® Performance Comfort Footwear
Footbed made fromFull SOFT-BED, made of extremely soft PU, anatomic, removable, antistatic, covered with cloth. Cold and heat insulation
Outer Sole made from PU/TPU
Plus points non metallic APT Plate - Zero Perforation, non metallic TOP RETURN toe cap, metal free
Safety Rating O2 WR SRC FO
SIZES 6-12 39-47
GORE-TEX® membrane is made of 1,4 billion pores per cm2 granting waterproofness and high breathability. GORE-TEX® membrane protects against bacteria and resists to high temperatures. Besides the tests in accordance with EN ISO 20345:2011 standard, all of our footwear with the GORE-TEX® membrane are subjected to strict tests required by Gore, to guarantee a superb manufacturing process.
PERFORMANCE COMFORT FOOTWEAR Durably waterproof and extremely breathable. Total comfort in any seasons. Recommended for people who need moderate to heavy insulation from cold weather.
Cofra Michelangelo Slip Resistance Results
|SRA : ceramic + detergent solution – flat||0.34||≥ 0.32|
|SRA : ceramic + detergent solution – heel (contact angle 7°)||0.30||≥ 0.28|
|SRB : steel + glycerol – flat||0.19||≥ 0.18|
|SRB : steel + glycerol – heel (contact angle 7°)||0.14||≥ 0.13|
"Waterproof" the test for a product to be rated as waterproof was 500 steps in 1cm of water it has now been increased to 1000 steps in 3cm of water, no material can ever be 100% waterproof it will always have some Ingres, if you are working in very wet conditions GORE-TEX lined products will give a better level of protection as they set the standard at 250,000 steps in 5cm of water, or a wellington. Wellingtons are only waterproof to a point if you are using a pressure washer this is at a much higher pressure than rain and very few wellingtons can withstand this.
Please Note Cofra Products Take 6-7 Days To Delivery As They Are An Italian Product, we do believe that they are well worth the extra wait