Cofra Galetti GORE-TEX Safety Trainers Aluminium Toe Caps & Composite Midsole
Model: Galetti Cofra
Description of the Cofra Galletti Safety Trainers Waterproof Safety Shoes
Highly breathable textile and water repellent breathable NEWTECH
Upper made fromhighly breathable textile
Lining made from GORE-TEXÂ® Extended Comfort Footwear
Footbed made from COFRA SOFT, footbed made of scented polyurethane, holed, antistatic, anatomic, soft and comfortable; the shape of the bottom part guarantees impact energy absorption (shock absorber) and high grip; the upper part absorbs moisture and keeps the foot dry
Outer Sole made from WORK TREK PU/Nitrile resistant to + 300°C (1 minute contact)
Plus points non metallic APT Plate, Aluminium toe cap
Width 11 Mondopoint
Slip Rating SRC
Safety Rating S3 WR
SIZES 6-12 39-47
These Cofra Shoes have a Gore-Tex, Membrane it is made of 1.4 billion pours per cm2 granting waterproofness and high breathability Gore-Tex, Membrane protects against bacteria and resists high temperatures.
These Cofra Shoes have a Top return Aluminium Toe Cap resistant to 200j,
The APT Plate is lighter than steel being only 50 gr compared to 65gr for steel, the APT midsole also offers a better thermal insulation compared to steel midsoled Shoes, the APT midsole offers a better surface area protected than a steel midsole would.
This Cofra boot has a Soft-Bed footbed insole which is soft and comfortable polyurethane; the patters of the lower layer guarentees shock absorbing action and good grip, the upper absorbs perspiration and leaves the foot always dry.
Please Note Cofra Products Take 6-7 Days To Delivery As They Are An Italian Product, we do believe that they are well worth the extra wait
Slip Resistance In Detail
SRA : ceramic + detergent solution – flat 0,56 0,32
SRA : ceramic + detergent solution – heel (contact angle 7°) 0,51 0,28
SRB : steel + glycerol – flat 0,25 0,18
SRB : steel + glycerol – heel (contact angle 7°) 0,19 0,13
Suggested uses Engineering jobs, building industry, maintenance jobs.
Care and maintenance Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.
It is extremely difficult to explain just how good Cofra's product is in comparison to other safety footwear.
"Waterproof" the test for a product to be rated as waterproof was 500 steps in 1cm of water it has now been increased to 1000 steps in 3cm of water, no material can ever be 100% waterproof it will always have some Ingres, if you are working in very wet conditions GORE-TEX lined products will give a better level of protection as they set the standard at 250,000 steps in 5cm of water, or a wellington. Wellingtons are only waterproof to a point if you are using a pressure washer this is at a much higher pressure than rain and very few wellingtons can withstand this.
Please note that some Cofra products may have a 10 day lead time to delivery