Cofra Summit Waterproof Safety Boots Steel Toe Caps Composite Midsole
Model: Summit Cofra
Description of the Cofra COFRA-TEX Safety Boots
Black water repellent nubuck leather, COFRA-TEX membrane lining, antistatic, anti-shock, slipping resistant, non metallic APT Plate midsole Zero Perforation, makes this quite a lightweight steel toe boot. Plus it also has COFRA-TEX waterproof membrane with “Proof Lining” system, stitched directly to the footbed, like a lining. Thesealing between the PU of the sole and the stitchings of the footbed guarantees waterproofness, thus preventing water leaking. Footbed AIR made of EVA and fabric, antistatic, anatomic, holed, antistatic. It guarantees high stability thanks to its different thicknesses in the plantar area. Perfumed sole. Support made of fibreglass conveniently placed between heel and sole, which provides support and protection of the plantar arch, thus preventing harmful bendings. PU toe cap protection.
Upper made from Water repellent nubuck and CORDURA®
Lining made from COFRA-TEX Waterproof membrane with Proof lining system
Footbed made from AIR footbed, made of EVA and fabric, anatomic, holed, antistatic. It guarantees high stability thanks to its different thicknesses in the plantar area.
Outer Sole made from Dual density PU
Plus points MIDSOLE: Non metallic APT Plate - Zero Perforation, TOE CAP: Steel
Width 11 Mondopoint
Safety Rating S3 WR SRC
SIZES 6.5-12 40-47
This is brand new boot to the Cofra COFRA-TEX range the Cofra Summit, is a very light weight safety boot extremely flexible with a scuff cap to help resist wear when kneeling, it has the new anti torsion sole great all round boot.
The midsole is an APT Plate is lighter than steel being only 50 gr compared to 65gr for steel, the APT midsole also offers a better thermal insulation compared to steel midsoled boots, the APT midsole offers a better surface area protected than a steel midsole would.
It is extremely difficult to explain just how good Cofra's product is in comparison to other safety footwear.
"Waterproof" to pass the EN ISO 20345 - 347 S2 S3 test for a product to be rated as waterproof after a 500m walk in 3cm of water the area of the sock that's wet must be under 3cm2 this is equivalent to 1000 steps, no material can ever be 100% waterproof it will always have some Ingres, unless it is lined with GORE-TEX if you are working in very wet conditions GORE-TEX lined products will give a much higher level of protection as they set the standard at 300,000 steps in 5cm of water and there has be no water ingress.
Cofra Summit Slip Resistance Results
SRA : ceramic + detergent solution – flat 0,42 0,32
SRA : ceramic + detergent solution – heel (contact angle 7°) 0,34 ,28
SRB : steel + glycerol – flat 0,20 0,18
SRB : steel + glycerol – heel (contact angle 7°) 0,14 0,13